Datasheet

 2011 Microchip Technology Inc. DS39995B-page 177

PIC24FV32KA304 FAMILY

bit 5 ACKDT: Acknowledge Data bit (when operating as I

C master; applicable during master receive)

Value that will be transmitted when the software initiates an Acknowledge sequence.

1 = Sends NACK during Acknowledge

0 = Sends ACK during Acknowledge

bit 4 ACKEN: Acknowledge Sequence Enable bit

(when operating as I

C master; applicable during master receive)

1 = Initiates Acknowledge sequence on SDAx and SCLx pins and transmits ACKDT data bit; hardware

is clear at end of master Acknowledge sequence

0 = Acknowledge sequence is not in progress

bit 3 RCEN: Receive Enable bit (when operating as I

C master)

1 = Enables Receive mode for I

C; hardware is clear at end of eighth bit of master receive data byte

0 = Receive sequence is not in progress

bit 2 PEN: Stop Condition Enable bit (when operating as I

C master)

1 = Initiates Stop condition on SDAx and SCLx pins; hardware is clear at end of master Stop sequence

0 = Stop condition is not in progress

bit 1 RSEN: Repeated Start Condition Enable bit (when operating as I

C master)

1 = Initiates Repeated Start condition on SDAx and SCLx pins; hardware clear at end of master

Repeated Start sequence

0 = Repeated Start condition is not in progress

bit 0 SEN: Start Condition Enable bit (when operating as I

C master)

1 = Initiates Start condition on SDAx and SCLx pins; hardware is clear at end of master Start sequence

0 = Start condition is not in progress