Datasheet

PIC18F97J60 FAMILY
DS39762F-page 438  2011 Microchip Technology Inc.
Module Differential Currents (I
WDT, IOSCB, IAD, IETH)
D022
(I
WDT)
Watchdog Timer 2.4 7.0 A -40°C
V
DD = 2.0V,
V
DDCORE = 2.0V
(4)
2.4 7.0 A +25°C
12.0 19.0 A +85°C
3.0 8.0 A -40°C
V
DD = 2.5V,
V
DDCORE = 2.5V
(4)
3.0 8.0 A +25°C
14.0 22.0 A +85°C
5.0 12.0 A -40°C
V
DD = 3.3V
(5)
5.0 12.0 A +25°C
19.0 30.0 A +85°C
D025
(I
OSCB)
Timer1 Oscillator 12.0 20.0 A -40°C
V
DD = 2.0V,
V
DDCORE = 2.0V
(4)
32 kHz on Timer1
(3)
12.0 20.0 A +25°C
24.0 36.0 A +85°C
13.0 21.0 A -40°C
V
DD = 2.5V,
V
DDCORE = 2.5V
(4)
32 kHz on Timer1
(3)
13.0 21.0 A +25°C
26.0 38.0 A +85°C
14.0 25.0 A -40°C
V
DD = 3.3V
(5)
32 kHz on Timer1
(3)
14.0 25.0 A +25°C
29.0 40.0 A +85°C
D026
(I
AD)
A/D Converter
1.2 10.0 A -40°C to +85°C
V
DD = 2.0V,
V
DDCORE = 2.0V
(4)
A/D on, not converting
1.2 10.0 A -40°C to +85°C
V
DD = 2.5V,
V
DDCORE = 2.5V
(4)
1.2 11.0 A -40°C to +85°C VDD = 3.3V
(5)
D027
I
ETH
(6)
Ethernet Module 130.0 156.0 mA -40°C to +85°C
V
DD = 3.3V
(5)
No transmit activity
180.0 214.0 mA -40°C to +85°C
Transmission in progress
28.2 DC Characteristics: Power-Down and Supply Current
PIC18F97J60 Family (Industrial) (Continued)
PIC18F97J60 Family
(Industrial)
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for industrial
Param
No.
Device Typ Max Units Conditions
Note 1: The power-down current in Sleep mode does not depend on the oscillator type. Power-down current is measured with
the part in Sleep mode, with all I/O pins in high-impedance state and tied to V
DD or VSS, and all features that add delta
current disabled (such as WDT, Timer1 oscillator, etc.).
2: The supply current is mainly a function of operating voltage, frequency and mode. Other factors, such as I/O pin loading
and switching rate, oscillator type and circuit, internal code execution pattern and temperature, also have an impact on
the current consumption.
The test conditions for all I
DD measurements in active operation mode are:
OSC1 = external square wave, from rail-to-rail; all I/O pins tri-stated, pulled to V
DD;
MCLR
= VDD; WDT enabled/disabled as specified.
3: Standard, low-cost 32 kHz crystals have an operating temperature range of -10°C to +70°C. Extended temperature
crystals are available at a much higher cost.
4: Voltage regulator disabled (ENVREG = 0, tied to V
SS).
5: Voltage regulator enabled (ENVREG = 1, tied to V
DD).
6: For I
ETH, the specified current includes current sunk through TPOUT+ and TPOUT-. LEDA and LEDB are disabled for
all testing.