Datasheet

PIC18F97J60 FAMILY
DS39762F-page 320  2011 Microchip Technology Inc.
EQUATION 21-1: CALCULATING BAUD RATE ERROR
TABLE 21-2: REGISTERS ASSOCIATED WITH BAUD RATE GENERATOR
Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Reset Values
on Page:
TXSTAx
CSRC TX9 TXEN SYNC SENDB BRGH TRMT TX9D 71
RCSTAx SPEN RX9 SREN CREN ADDEN FERR OERR RX9D 71
BAUDCONx ABDOVF RCIDL RXDTP TXCKP BRG16 — WUE ABDEN 72
SPBRGHx EUSARTx Baud Rate Generator Register High Byte 72
SPBRGx EUSARTx Baud Rate Generator Register Low Byte 72
Legend: — = unimplemented, read as ‘0’. Shaded cells are not used by the BRG.
For a device with FOSC of 16 MHz, desired baud rate of 9600, Asynchronous mode, 8-bit BRG:
Desired Baud Rate = F
OSC/(64 ([SPBRGHx:SPBRGx] + 1))
Solving for SPBRGHx:SPBRGx:
X = ((F
OSC/Desired Baud Rate)/64) – 1
= ((16000000/9600)/64) – 1
= [25.042] = 25
Calculated Baud Rate=16000000/(64 (25 + 1))
= 9615
Error = (Calculated Baud Rate – Desired Baud Rate)/Desired Baud Rate
= (9615 – 9600)/9600 = 0.16%