Datasheet

PIC18F66K80 FAMILY
DS39977C-page 182 Preliminary  2011 Microchip Technology Inc.
TABLE 11-1: PORTA FUNCTIONS
Pin Name Function
TRIS
Setting
I/O I/O Type Description
RA0/CV
REF/AN0/
ULPWU
RA0 0 O DIG LATA<0> data output; not affected by analog input.
1 I ST PORTA<0> data input; disabled when analog input is enabled.
CV
REF x O ANA Comparator voltage reference output. Enabling this feature disables
digital I/O.
AN0 1 I ANA A/D Input Channel 0. Default input configuration on POR; does not
affect digital output.
ULPWU 1 O DIG Ultra low-power wake-up input.
RA1/AN1/C1INC RA1 0 O DIG LATA<1> data output; not affected by analog input.
1 I ST PORTA<1> data input; disabled when analog input is enabled.
AN1 1 I ANA A/D Input Channel 1. Default input configuration on POR; does not
affect digital output.
C1INC
(1)
x I ANA Comparator 1 Input C.
RA2/V
REF-/AN2/
C2INC
RA2 0 O DIG LATA<2> data output; not affected by analog input.
1 I ST PORTA<2> data input; disabled when analog functions are enabled.
V
REF- 1 I ANA A/D and comparator low reference voltage input.
AN2 1 I ANA A/D Input Channel 2. Default input configuration on POR.
C2INC
(1)
x I ANA Comparator 2 Input C.
RA3/V
REF+/AN3 RA3 0 O DIG LATA<3> data output; not affected by analog input.
1 I ST PORTA<3> data input; disabled when analog input is enabled.
V
REF+ 1 I ANA A/D Input Channel 3. Default input configuration on POR.
AN3 1 I ANA A/D and comparator high reference voltage input.
RA5/AN4/C2INB/
HLVDIN/T1CKI/SS
/
CTMUI
RA5 0 O DIG LATA<5> data output; not affected by analog input.
1 I ST PORTA<5> data input; disabled when analog input is enabled.
AN4 1 I ANA A/D Input Channel 4. Default configuration on POR.
C2INB
(2)
1 I ANA Comparator 2 Input B.
HLVDIN 1 I ANA High/Low-Voltage Detect external trip point input.
T1CKI x I ST Timer1 clock input.
SS
1 I ST Slave select input for MSSP module.
CTMUI
(2)
x O — CTMU pulse generator charger for the C2INB comparator input.
RA6/OSC2/
CLKOUT
RA6 0 O DIG LATA<6> data output; disabled when FOSC2 Configuration bit is set.
1 I ST PORTA<6> data input; disabled when FOSC2 Configuration bit is set.
OSC2 x O ANA Main oscillator feedback output connection (HS, XT and LP modes).
CLKOUT x O DIG System cycle clock output (FOSC/4) (EC and INTOSC modes).
RA7/OSC1/CLKIN RA7 0 O DIG LATA<7> data output; disabled when FOSC2 Configuration bit is set.
1 I ST PORTA<7> data input; disabled when FOSC2 Configuration bit is set.
OSC1 x I ANA Main oscillator input connection (HS, XT, and LP modes).
CLKIN x I ANA Main external clock source input (EC modes).
Legend: O = Output, I = Input, ANA = Analog Signal, DIG = CMOS Output, ST = Schmitt Trigger Buffer Input,
x = Don’t care (TRIS bit does not affect port direction or is overridden for this option)
Note 1: Pin assignment unavailable for 28-pin devices (PIC18F2XK80).
2: Pin assignment only available for 28-pin devices (PIC18F2XK80).