Datasheet

PIC18F2XK20/4XK20
DS40001303H-page 360  2010-2015 Microchip Technology Inc.
D070 IPURB PORTB weak pull-up
current
50 90 400 AVDD = 3.0V, VPIN =
V
SS
TABLE 26-9: INPUT/OUTPUT CHARACTERISTICS, PIC18F2XK20/4XK20 (CONTINUED)
DC CHARACTERISTICS Standard Operating Conditions (unless otherwise stated)
Param.
No.
Symbol Characteristic Min. Typ.† Max. Units Conditions
Note 1: In RC oscillator configuration, the OSC1/CLKIN pin is a Schmitt Trigger input. It is not recommended that
the PIC
®
device be driven with an external clock while in RC mode.
2: The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified
levels represent normal operating conditions. Higher leakage current may be measured at different input
voltages.
3: Negative current is defined as current sourced by the pin.
4: Parameter is characterized but not tested.