Datasheet

 2010 Microchip Technology Inc. Preliminary DS41412C-page 435
PIC18(L)F2X/4XK22
D137 10 50 A -40°C
VDD = 1.8V
FOSC = 32 kHz
(SEC_IDLE mode,
SOSC source)
13 50 A +25°C
16 50 A +85°C
19 60 A +125°C
D138 11 50 A -40°C
VDD = 3.0V
15 50 A +25°C
18 50 A +85°C
22 60 A +125°C
D139 13 50 A -40°C
VDD = 5.0V
17 50 A +25°C
20 50 A +85°C
24 60 A +125°C
27.7 DC Characteristics: Secondary Oscillator Supply Current, PIC18(L)F2X/4XK22
PIC18LF2X/4XK22
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  T
A  +125°C
PIC18F2X/4XK22
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  T
A  +125°C
Param
No.
Device Characteristics Typ Max Units Conditions
Note 1: The supply current is mainly a function of operating voltage, frequency and mode. Other factors, such as
I/O pin loading and switching rate, oscillator type and circuit, internal code execution pattern and temper-
ature, also have an impact on the current consumption.
2: The test conditions for all I
DD measurements in active operation mode are:
All I/O pins set as outputs driven to VSS;
MCLR
= VDD;
OSC1 = external square wave, from rail-to-rail (PRI_RUN and PRI_IDLE only).