Datasheet

PIC18(L)F2X/4XK22
DS41412C-page 432 Preliminary  2010 Microchip Technology Inc.
D089 6.8 11 mA -40°C to +125°C VDD = 3.0V FOSC = 16 MHz
64 MHz Internal
(PRI_RUN, EC +
PLL)
D090
7.5 13 mA -40°C to +125°C VDD = 5.0V
27.5 DC Characteristics: Primary Run Supply Current, PIC18(L)F2X/4XK22 (Continued)
PIC18LF2X/4XK22 Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  T
A  +125°C
PIC18F2X/4XK22 Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  T
A  +125°C
Param
No.
Device Characteristics Typ Max Units Conditions
Note 1: The supply current is mainly a function of operating voltage, frequency and mode. Other factors, such as
I/O pin loading and switching rate, oscillator type and circuit, internal code execution pattern and temper-
ature, also have an impact on the current consumption.
The test conditions for all I
DD measurements in active operation mode are:
OSC1 = external square wave, from rail-to-rail; all I/O pins tri-stated, pulled to V
DD;
MCLR = VDD; WDT enabled/disabled as specified.
2: The test conditions for all I
DD measurements in active operation mode are:
All I/O pins set as outputs driven to VSS;
MCLR
= VDD;
OSC1 = external square wave, from rail-to-rail (PRI_RUN and PRI-IDLE only).