Datasheet

 2010 Microchip Technology Inc. Preliminary DS41412C-page 427
PIC18(L)F2X/4XK22
27.3 DC Characteristics: RC Run Supply Current, PIC18(L)F2X/4XK22
PIC18LF2X/4XK22
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  T
A  +125°C
PIC18F2X/4XK22
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  T
A  +125°C
Param
No.
Device Characteristics Typ Max Units Conditions
D020
Supply Current (I
DD)
(1),(2)
5.0 14 A -40°C
V
DD = 1.8V
F
OSC = 31 kHz
(RC_RUN mode,
LFINTOSC source)
4.0 14 A +25°C
4.0 — A +60°C
4.5 18 A +85°C
7.0 30 A125°C
D021 8.0 20 A -40°C
V
DD = 3.0V
7.0 20 A +25°C
7.0 — A +60°C
7.5 22 A +85°C
10.0 35 A +125°C
D022 12 50 A -40°C
VDD = 1.8V
FOSC = 31 kHz
(RC_RUN mode,
LFINTOSC source)
15 50 A +25°C
17 50 A +85°C
20 60 A +125°C
D023 16 50 A -40°C
VDD = 3.0V
19 50 A +25°C
23 50 A +85°C
25 60 A +125°C
D024
17 50 A -40°C
VDD = 5.0V
21 50 A +25°C
24 50 A +85°C
28 60 A +125°C
D025 0.12 0.25 mA -40°C to +125°C V
DD = 1.8V FOSC = 500 KHz
(RC_RUN mode,
MFINTOSC source)
D026 0.15 0.30 mA -40°C to +125°C V
DD = 3.0V
D027 0.16 0.30
mA
-40°C to +125°C VDD = 1.8V
FOSC = 500 KHz
(RC_RUN mode,
MFINTOSC source)
D028
0.20
0.40
mA
-40°C to +125°C VDD = 3.0V
D029
0.25
0.50
mA
-40°C to +125°C VDD = 5.0V
D030
0.30
0.50
mA
-40°C to +125°C V
DD = 1.8V
F
OSC = 1 MHz
(RC_RUN mode,
HFINTOSC source)
D031
0.40
0.70
mA
-40°C to +125°C V
DD = 3.0V
D032
0.35
0.60
mA
-40°C to +125°C VDD = 1.8V
FOSC = 1 MHz
(RC_RUN mode,
HFINTOSC source)
D033
0.45
0.80
mA
-40°C to +125°C VDD = 3.0V
D034
0.55
0.90
mA
-40°C to +125°C VDD = 5.0V
Note 1: The supply current is mainly a function of operating voltage, frequency and mode. Other factors, such as I/O pin
loading and switching rate, oscillator type and circuit, internal code execution pattern and temperature, also have an
impact on the current consumption.
Test condition: All Peripheral Module Control bits in PMD0, PMD1 and PMD2 set to ‘1’.
2: The test conditions for all I
DD measurements in active operation mode are:
All I/O pins set as outputs driven to Vss;
MCLR
= VDD;
OSC1 = external square wave, from rail-to-rail (PRI_RUN and PRI_IDLE only).