Datasheet

 2010 Microchip Technology Inc. Preliminary DS41412C-page 299

PIC18(L)F2X/4XK22

bit 0 ADON: ADC Enable bit

1 = ADC is enabled

0 = ADC is disabled and consumes no operating current

Note 1: Available on PIC18(L)F4XK22 devices only.

2: Allow greater than 15 s acquisition time when measuring the Fixed Voltage Reference.

R/W-0 U-0 U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0

TRIGSEL — — — PVCFG<1:0> NVCFG<1:0>

bit 7 bit 0

Legend:

R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’

-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 7 TRIGSEL: Special Trigger Select bit

1 = Selects the special trigger from CTMU

0 = Selects the special trigger from CCP5

bit 6-4 Unimplemented: Read as ‘0’

bit 3-2 PVCFG<1:0>: Positive Voltage Reference Configuration bits

00 = A/D V

REF+ connected to internal signal, AVDD

01 = A/D VREF+ connected to external pin, VREF+

10 = A/D V

REF+ connected to internal signal, FVR BUF2

11 = Reserved (by default, A/D VREF+ connected to internal signal, AVDD)

bit 1-0 NVCFG0<1:0>: Negative Voltage Reference Configuration bits

00 = A/D VREF- connected to internal signal, AVSS

01 = A/D VREF- connected to external pin, VREF-

10 = Reserved (by default, A/D V

REF+ connected to internal signal, AVSS)

11 = Reserved (by default, A/D V

REF+ connected to internal signal, AVSS)