Datasheet

PIC16F882/883/884/886/887
DS40001291H-page 266  2006-2015 Microchip Technology Inc.
17.9 High Temperature Operation
This section outlines the specifications for the following
devices operating in the high temperature range
between -40°C and 150°C.
(4)
•PIC16F886
•PIC16F887
When the value of any parameter is identical for both
the 125°C Extended and the 150°C High Temp.
temperature ranges, then that value will be found in the
standard specification tables shown earlier in this
chapter, under the fields listed for the 125°C Extended
temperature range. If the value of any parameter is
unique to the 150°C High Temp. temperature range,
then it will be listed here, in this section of the data
sheet.
If a Silicon Errata exists for the product and it lists a
modification to the 125°C Extended temperature range
value, one that is also shared at the 150°C high temp.
temperature range, then that modified value will apply
to both temperature ranges.
TABLE 17-17: ABSOLUTE MAXIMUM RATINGS
Note 1: Writes are not allowed for Flash
program memory above 125°C.
2: The temperature range indicator in the
catalog part number and device marking
is “H” for -40°C to 150°C.
Example: PIC16F887T-H/PT indicates
the device is shipped in a Tape and reel
configuration, in the TQFP package, and
is rated for operation from -40°C to
150°C.
3: The +150°C version of the PIC16F886
and PIC16F887 will not be offered in
PDIP. It will only be offered in SSOP,
SOIC, QFN and TQFP.
4: AEC-Q100 reliability testing for devices
intended to operate at 150°C is 1,000
hours. Any design in which the total oper-
ating time from 125°C to 150°C will be
greater than 1,000 hours is not warranted
without prior written approval from
Microchip Technology Inc.
Parameter Source/Sink Value Units
Max. Current: V
DD Source 20 mA
Max. Current: VSS Sink 50 mA
Max. Current: Pin Source 5 mA
Max. Current: Pin Sink 10 mA
Max. Pin Current: at V
OH Source 3 mA
Max. Pin Current: at V
OL Sink 8.5 mA
Max. Port Current: A, B, and C
combined
Source 20 mA
Max. Port Current: A, B, and C
combined
Sink 50 mA
Max. Junction Temperature 155 °C
Note: Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the
device. This is a stress rating only, and functional operation of the device at those or any other conditions
above those indicated in the operation listings of this specification is not implied. Exposure above
maximum rating conditions for extended periods may affect device reliability.