Datasheet

 2003 Microchip Technology Inc. DS39582B-page 151
PIC16F87XA
FIGURE 14-6: TIME-OUT SEQUENCE ON POWER-UP (MCLR TIED TO VDD VIA RC NETWORK)
TRISD 73A 74A 76A 77A 1111 1111 1111 1111 uuuu uuuu
TRISE 73A 74A 76A 77A 0000 -111 0000 -111 uuuu -uuu
PIE1
73A 74A 76A 77A r000 0000 r000 0000 ruuu uuuu
73A 74A 76A 77A 0000 0000 0000 0000 uuuu uuuu
PIE2 73A 74A 76A 77A -0-0 0--0 -0-0 0--0 -u-u u--u
PCON 73A 74A 76A 77A ---- --qq ---- --uu ---- --uu
SSPCON2 73A 74A 76A 77A 0000 0000 0000 0000 uuuu uuuu
PR2 73A 74A 76A 77A 1111 1111 1111 1111 1111 1111
SSPADD 73A 74A 76A 77A 0000 0000 0000 0000 uuuu uuuu
SSPSTAT 73A 74A 76A 77A --00 0000 --00 0000 --uu uuuu
TXSTA 73A 74A 76A 77A 0000 -010 0000 -010 uuuu -uuu
SPBRG 73A 74A 76A 77A 0000 0000 0000 0000 uuuu uuuu
CMCON 73A 974 76A 77A 0000 0111 0000 0111 uuuu uuuu
CVRCON 73A 74A 76A 77A 000- 0000 000- 0000 uuu- uuuu
ADRESL 73A 74A 76A 77A xxxx xxxx uuuu uuuu uuuu uuuu
ADCON1 73A 74A 76A 77A 00-- 0000 00-- 0000 uu-- uuuu
EEDATA 73A 74A 76A 77A xxxx xxxx uuuu uuuu uuuu uuuu
EEADR 73A 74A 76A 77A xxxx xxxx uuuu uuuu uuuu uuuu
EEDATH 73A 74A 76A 77A xxxx xxxx uuuu uuuu uuuu uuuu
EEADRH 73A 74A 76A 77A xxxx xxxx uuuu uuuu uuuu uuuu
EECON1 73A 74A 76A 77A x--- x000 u--- u000 u--- uuuu
EECON2 73A 74A 76A 77A ---- ---- ---- ---- ---- ----
TABLE 14-6: INITIALIZATION CONDITIONS FOR ALL REGISTERS (CONTINUED)
Register Devices
Power-on Reset,
Brown-out Reset
MCLR
Resets,
WDT Reset
Wake-up via WDT or
Interrupt
Legend: u = unchanged, x = unknown, - = unimplemented bit, read as ‘0’, q = value depends on condition,
r = reserved, maintain clear. Shaded cells indicate conditions do not apply for the designated device.
Note 1: One or more bits in INTCON, PIR1 and/or PIR2 will be affected (to cause wake-up).
2: When the wake-up is due to an interrupt and the GIE bit is set, the PC is loaded with the interrupt vector
(0004h).
3: See Table 14-5 for Reset value for specific condition.
TPWRT
TOST
VDD
MCLR
Internal POR
PWRT Time-out
OST Time-out
Internal Reset