Datasheet

PIC16F818/819
DS39598C-page 120 Preliminary  2002 Microchip Technology Inc.
15.2 DC Characteristics: Power-down and Supply Current
PIC16F818/819 (Industrial, Extended)
PIC16LF818/819 (Industrial)
PIC16LF818/819
(Industrial)
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C ≤ T
A ≤ +85°C for industrial
PIC16F818/819
(Industrial, Extended)
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C ≤ T
A ≤ +85°C for industrial
-40°C ≤ T
A ≤ +125°C for extended
Param
No.
Device Typ Max Units Conditions
Power-down Current (I
PD)
(1)
PIC16LF818/819 0.2 TBD µA
-40°C
0.2 TBD µA
25°C V
DD = 2.0V
0.3 TBD µA
85°C
PIC16LF818/819 0.3 TBD µA
-40°C
0.3 TBD µA
25°C V
DD = 3.0V
0.4 TBD µA
85°C
All devices 0.4 TBD µA
-40°C
0.5 TBD µA
25°C V
DD = 5.0V
0.6 TBD µA
85°C
Legend: Shading of rows is to assist in readability of the table.
Note 1: The power-down current in SLEEP mode does not depend on the oscillator type. Power-down current is measured with
the part in SLEEP mode, with all I/O pins in high-impedance state and tied to V
DD or VSS, and all features that add delta
current disabled (such as WDT, Timer1 Oscillator, BOR, etc.).
2: The supply current is mainly a function of operating voltage, frequency and mode. Other factors, such as I/O pin loading
and switching rate, oscillator type and circuit, internal code execution pattern and temperature, also have an impact on
the current consumption.
The test conditions for all I
DD measurements in active Operation mode are:
OSC1 = external square wave, from rail-to-rail; all I/O pins tri-stated, pulled to V
DD;
MCLR
= VDD; WDT enabled/disabled as specified.
3: For RC oscillator configurations, current through R
EXT is not included. The current through the resistor can be estimated
by the formula Ir = V
DD/2REXT (mA) with REXT in kΩ.