Datasheet

 2002 Microchip Technology Inc. Preliminary DS39598C-page 161
PIC16F818/819
PIC16F818/819 PRODUCT IDENTIFICATION SYSTEM
To order or obtain information, e.g., on pricing or delivery, refer to the factory or the listed sales office.
Sales and Support
PART NO. X /XX XXX
PatternPackageTemperature
Range
Device
Device PIC16F818: Standard VDD range
PIC16F818T: (Tape and Reel)
PIC16LF818: Extended V
DD range
Temperature Range - = 0°C to +70°C
I = -40°C to +85°C
Package P = PDIP
SO = SOIC
SS = SSOP
ML = QFN
Pattern QTP, SQTP, ROM Code (factory specified) or
Special Requirements. Blank for OTP and
Windowed devices.
Examples:
a) PIC16F818-I/P = Industrial temp., PDIP
package, Extended V
DD limits.
b) PIC16F818-I/SO = Industrial temp., SOIC
package, normal V
DD limits.
Note 1: F = CMOS FLASH
LF = Low Power CMOS FLASH
2: T = in tape and reel - SOIC, SSOP
packages only.
Data Sheets
Products supported by a preliminary Data Sheet may have an errata sheet describing minor operational differences and recom-
mended workarounds. To determine if an errata sheet exists for a particular device, please contact one of the following:
1. Your local Microchip sales office
2. The Microchip Corporate Literature Center U.S. FAX: [phone]
3. The Microchip Worldwide Site (www.microchip.com)
Please specify which device, revision of silicon and Data Sheet (include Literature #) you are using.
New Customer Notification System
Register on our web site (www.microchip.com/cn) to receive the most current information on our products.