Datasheet

 2010 Microchip Technology Inc. DS40039F-page 89
PIC16F630/676
12.2 DC Characteristics: PIC16F630/676-I (Industrial)
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40C  T
A  +85C for industrial
Param
No.
Device Characteristics Min Typ† Max Units
Conditions
V
DD Note
D010 Supply Current (I
DD) —916A2.0FOSC = 32 kHz
LP Oscillator Mode
—1828 A3.0
—3554 A5.0
D011 — 110 150 A2.0F
OSC = 1 MHz
XT Oscillator Mode
— 190 280 A3.0
— 330 450 A5.0
D012 — 220 280 A2.0F
OSC = 4 MHz
XT Oscillator Mode
— 370 650 A3.0
— 0.6 1.4 mA 5.0
D013 — 70 110 A2.0F
OSC = 1 MHz
EC Oscillator Mode
— 140 250 A3.0
— 260 390 A5.0
D014 — 180 250 A2.0F
OSC = 4 MHz
EC Oscillator Mode
— 320 470 A3.0
— 580 850 A5.0
D015 — 340 450 A2.0F
OSC = 4 MHz
INTOSC Mode
— 500 780 A3.0
— 0.8 1.1 mA 5.0
D016 — 180 250 A2.0F
OSC = 4 MHz
EXTRC Mode
— 320 450 A3.0
— 580 800 A5.0
D017 — 2.1 2.95 mA 4.5 F
OSC = 20 MHz
HS Oscillator Mode
— 2.4 3.0 mA 5.0
† Data in “Typ” column is at 5.0V, 25C unless otherwise stated. These parameters are for design guidance
only and are not tested.
Note 1: The test conditions for all IDD measurements in Active Operation mode are: OSC1 = external square wave,
from rail-to-rail; all I/O pins tri-stated, pulled to V
DD; MCLR = VDD; WDT disabled.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors such as I/O
pin loading and switching rate, oscillator type, internal code execution pattern, and temperature also have
an impact on the current consumption.