Datasheet

 2009 Microchip Technology Inc. Preliminary DS41364D-page 411
PIC16F193X/LF193X
30.0 ELECTRICAL SPECIFICATIONS (PIC16F/LF1934/36/37)
Absolute Maximum Ratings
(†)
Ambient temperature under bias....................................................................................................... -40°C to +125°C
Storage temperature ........................................................................................................................ -65°C to +150°C
Voltage on V
DD with respect to VSS, PIC16F1934/36/37 ................................................................... -0.3V to +6.5V
Voltage on V
CAP pin with respect to VSS, PIC16F1934/36/37 ............................................................. -0.3V to +4.0V
Voltage on V
DD with respect to VSS, PIC16LF1934/36/37 ................................................................. -0.3V to +4.0V
Voltage on MCLR
with respect to Vss ................................................................................................. -0.3V to +9.0V
Voltage on all other pins with respect to V
SS ........................................................................... -0.3V to (VDD + 0.3V)
Total power dissipation
(1)
...............................................................................................................................800 mW
Maximum current out of V
SS
(2)
pin, -40°C  TA  +85°C for industrial ........................................................... 255 mA
Maximum current out of V
SS
(2)
pin, -40°C  TA  +125°C for extended........................................................ 105 mA
Maximum current into V
DD
(2)
pin, -40°C  TA  +85°C for industrial .............................................................. 170 mA
Maximum current into V
DD
(2)
pin, -40°C  TA  +125°C for extended............................................................. 70 mA
Maximum current out of V
SS
(3)
pin, -40°C  TA  +85°C for industrial ............................................................ 340mA
Maximum current out of V
SS
(3)
pin, -40°C  TA  +125°C for extended........................................................ 140 mA
Maximum current into V
DD
(3)
pin, -40°C  TA  +85°C for industrial .............................................................. 255 mA
Maximum current into V
DD
(3)
pin, -40°C  TA  +125°C for extended........................................................... 105 mA
Clamp current, I
K (VPIN < 0 or VPIN > VDD)20 mA
Maximum output current sunk by any I/O pin.................................................................................................... 25 mA
Maximum output current sourced by any I/O pin .............................................................................................. 25 mA
Note 1: Power dissipation is calculated as follows: P
DIS = VDD x {IDD –  IOH} +  {(VDD – VOH) x IOH} + (VOl x IOL)
2: For 28-pin devices.
3: For 40-pin devices..
† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only and functional operation of the device at those or any other conditions above those
indicated in the operation listings of this specification is not implied. Exposure above maximum rating conditions for
extended periods may affect device reliability.