Datasheet
2010-2015 Microchip Technology Inc. DS40001419F-page 371
PIC16(L)F1824/8
TABLE 30-19: DC CHARACTERISTICS FOR PIC16F1824/8-H (High Temp.)
TABLE 30-20: DC CHARACTERISTICS FOR IDD SPECIFICATIONS FOR PIC16F1824/8-H (High
Temp.)
PIC16F1824/8
Standard Operating Conditions: (unless otherwise stated)
Operating Temperature: -40°C T
A +150°C for High Temperature
Param
No.
Sym. Characteristics Min. Typ. Max. Units Condition
D001 V
DD Supply Voltage 2.5 — 5.5 V FOSC 32 MHz (Note 2)
D002* VDR
RAM Data Retention Voltage
(1)
2.1 — 5.5 V Device in Sleep mode
D003 V
ADFVR Fixed Voltage Reference
Voltage for ADC
-10 — 8 % 1.024V, VDD 2.5V
2.048V, V
DD 2.5V
4.096V, V
DD 4.75V
D003A V
CDAFV
R
Fixed Voltage Reference
Voltage for ADC
-13 — 9 % 1.024V, VDD 2.5V
2.048V, V
DD 2.5V
4.096V, V
DD 4.75V
* These parameters are characterized but not tested.
† Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance
only and are not tested.
Note 1: This is the limit to which VDD can be lowered in Sleep mode without losing RAM data.
2: PLL required for 32 MHz operation.
PIC16F1824/8
Standard Operating Conditions: (unless otherwise stated)
Operating Temperature: -40°C T
A +150°C for High Temperature
Param
No.
Device Characteristics Min. Typ. Max. Units
Condition
V
DD Note
Supply Voltage (I
DD)
(1,2)
D010A — — 70 A3.0FOSC 32 kHz
LP Oscillator mode
——75A5.0
D015 — — 75 A3.0FOSC 31 kHz
LFINTOSC mode
——80A5.0
† Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance
only and are not tested.
Note 1: The test conditions for all I
DD measurements in active operation mode are: OSC1 = external square wave,
from rail-to-rail; all I/O pins tri-stated, pulled to V
DD; MCLR = VDD; WDT disabled.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O
pin loading and switching rage, oscillator type, internal code execution pattern, and temperature, also have
an impact on the current consumption.