Datasheet

 2010-2015 Microchip Technology Inc. DS40001419F-page 369
PIC16(L)F1824/8
30.9 High Temperature Operation
This section outlines the specifications for the following
devices operating in the high temperature range
between -40°C and 150°C.
(2)
• PIC16F1824
(4)
• PIC16F1828
(4)
When the value of any parameter is identical for both
the 125°C Extended and the 150°C High Temp.
temperature ranges, then that value will be found in the
standard specification tables shown earlier in this
chapter, under the fields listed for the 125°C Extended
temperature range. If the value of any parameter is
unique to the 150°C High Temp. temperature range,
then it will be listed here, in this section of the data
sheet.
If a Silicon Errata exists for the product and it lists a
modification to the 125°C Extended temperature range
value, one that is also shared at the 150°C High Temp.
temperature range, then that modified value will apply
to both temperature ranges.
TABLE 30-18: ABSOLUTE MAXIMUM RATINGS
Note 1: Writes are not allowed for Flash
program memory above 125°C.
2: AEC-Q100 reliability testing for devices
intended to operate at 150°C is 1,000
hours. Any design in which the total oper-
ating time from 125°C to 150°C will be
greater than 1,000 hours is not warranted
without prior written approval from
Microchip Technology Inc.
3: The temperature range indicator in the
catalog part number and device marking
is “H” for -40°C to 150°C.
Example: PIC16F1824T-H/SL indicates
the device is shipped in a Tape and Reel
configuration, in the SOIC package, and
is rated for operation from -40°C to
150°C.
4: The low voltage versions of these devices,
PIC16LF1824 and PIC16LF1828, are not
released for operation above +125°C.
5: Errata Sheet DS80510 lists various mask
revisions. 150°C operation applies only
to revisions A5 and later.
6: The Capacitive Sensing module (CPS)
should not be used in high temperature
devices. Function and its parametrics are
not warranted.
7: Only SOIC (SL), TSSOP (ST), SSOP
(SS) and QFN (ML) packages will be
offered, not PDIP or UQFN.
Parameter Condition Value
Max. Current: V
DD Source 15 mA
Max. Current: VSS Sink 15 mA
Max. Current: Pin Source 5 mA
Max. Current: Pin Sink 5 mA
Max. Storage Temperature — -65°C to 155°C
Max. Junction Temperature — +155°C
Ambient Temperature under Bias — -40°C to +150°C
Note: Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the
device. This is a stress rating only, and functional operation of the device at those or any other conditions
above those indicated in the operation listings of this specification is not implied. Exposure above maximum
rating conditions for extended periods may affect device reliability.