Datasheet

PIC12(L)F1501
DS40001615C-page 214  2011-2015 Microchip Technology Inc.
TABLE 27-2: SUPPLY CURRENT (IDD)
(1,2)
PIC12LF1501
Standard Operating Conditions (unless otherwise stated)
PIC12F1501
Param.
No.
Device
Characteristics
Min. Typ† Max. Units
Conditions
V
DD Note
D013 — 30 65 A1.8F
OSC = 1 MHz,
External Clock (ECM),
Medium Power mode
—55100A3.0
D013 — 65 110 A 2.3 FOSC = 1 MHz,
External Clock (ECM),
Medium Power mode
— 85 140 A 3.0
— 115 190 A 5.0
D014 — 115 190 A1.8F
OSC = 4 MHz,
External Clock (ECM),
Medium Power mode
— 210 310 A3.0
D014 — 180 270 A 2.3 FOSC = 4 MHz,
External Clock (ECM),
Medium Power mode
— 240 365 A 3.0
— 295 460 A 5.0
D015 — 3.2 12 A1.8F
OSC = 31 kHz,
LFINTOSC,
-40°C  T
A  +85°C
—5.420 A3.0
D015 — 13 28 A 2.3 FOSC = 31 kHz,
LFINTOSC,
-40°C  T
A  +85°C
— 15 30 A 3.0
— 17 36 A 5.0
D016 — 215 360 A1.8F
OSC = 500 kHz,
HFINTOSC
— 275 480 A3.0
D016 — 270 450 A 2.3 FOSC = 500 kHz,
HFINTOSC
— 300 500 A 3.0
— 350 620 A 5.0
D017* — 410 660 A1.8FOSC = 8 MHz,
HFINTOSC
— 630 970 A3.0
D017* — 530 750 A 2.3 FOSC = 8 MHz,
HFINTOSC
— 660 1100 A 3.0
— 730 1200 A 5.0
D018 — 600 940 A1.8F
OSC = 16 MHz,
HFINTOSC
— 970 1400 A3.0
D018 — 780 1200 A 2.3 FOSC = 16 MHz,
HFINTOSC
— 1000 1550 A 3.0
— 1090 1700 A 5.0
* These parameters are characterized but not tested.
† Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance
only and are not tested.
Note 1: The test conditions for all I
DD measurements in active operation mode are: OSC1 = external square wave,
from rail-to-rail; all I/O pins tri-stated, pulled to V
SS; MCLR = VDD; WDT disabled.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O
pin loading and switching rate, oscillator type, internal code execution pattern and temperature, also have
an impact on the current consumption.