Datasheet

PIC12(L)F1501
DS40001615C-page 212  2011-2015 Microchip Technology Inc.
27.3 DC Characteristics
TABLE 27-1: SUPPLY VOLTAGE
PIC12LF1501
Standard Operating Conditions (unless otherwise stated)
PIC12F1501
Param.
No.
Sym. Characteristic Min. Typ† Max. Units Conditions
D001 V
DD Supply Voltage
V
DDMIN
1.8
2.5
—
—
V
DDMAX
3.6
3.6
V
V
FOSC  16 MHz
F
OSC  20 MHz
D001 2.3
2.5
—
—
5.5
5.5
V
V
FOSC  16 MHz
F
OSC  20 MHz
D002* V
DR RAM Data Retention Voltage
(1)
1.5 — — V Device in Sleep mode
D002* 1.7 — — V Device in Sleep mode
D002A* V
POR Power-on Reset Release Voltage
(2)
—1.6— V
D002A* — 1.6 — V
D002B* VPORR* Power-on Reset Rearm Voltage
(2)
—0.8— V
D002B* — 1.5 — V
D003 VFVR Fixed Voltage Reference Voltage
1x gain (1.024V nominal)
2x gain (2.048V nominal)
4x gain (4.096V nominal)
-11 — +7 %
V
DD 2.5V, -40°C  TA  +85°C
V
DD 2.5V, -40°C  TA  +85°C
V
DD 4.75V, -40°C  TA  +85°C
D004* S
VDD VDD Rise Rate
(2)
0.05 — — V/ms Ensures that the Power-on Reset
signal is released properly.
* These parameters are characterized but not tested.
† Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are not
tested.
Note 1: This is the limit to which V
DD can be lowered in Sleep mode without losing RAM data.
2: See Figure 27-3, POR and POR REARM with Slow Rising V
DD.