Datasheet

 2011-2015 Microchip Technology Inc. DS40001615C-page 189
PIC12(L)F1501
REGISTER 24-3: CWGxCON2: CWG CONTROL REGISTER 2
R/W-0/0 R/W-0/0 U-0 U-0 U-0 R/W-0/0 R/W-0/0 R/W-0/0
GxASE GxARSEN
— — —
GxASDSC1 GxASDSFLT GxASDSCLC2
bit 7 bit 0
Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
u = Bit is unchanged x = Bit is unknown -n/n = Value at POR and BOR/Value at all other Resets
‘1’ = Bit is set ‘0’ = Bit is cleared q = Value depends on condition
bit 7 GxASE: Auto-Shutdown Event Status bit
1 = An auto-shutdown event has occurred
0 = No auto-shutdown event has occurred
bit 6 GxARSEN: Auto-Restart Enable bit
1 = Auto-restart is enabled
0 = Auto-restart is disabled
bit 5-3 Unimplemented: Read as ‘0’
bit 2 GxASDSC1: CWG Auto-shutdown on Comparator C1 Enable bit
1 = Shutdown when Comparator C1 output (C1OUT_async) is high
0 = Comparator C1 output has no effect on shutdown
bit 1 GxASDSFLT: CWG Auto-shutdown on FLT Enable bit
1 = Shutdown when CWG1FLT
input is low
0 =CWG1FLT
input has no effect on shutdown
bit 0 GxASDSCLC2: CWG Auto-shutdown on CLC2 Enable bit
1 = Shutdown when CLC2 output (LC2_out) is high
0 = CLC2 output has no effect on shutdown