User Guide

MCP37X1X-200 12-BIT EVALUATION KIT
USER’S GUIDE
 2016 Microchip Technology Inc. DS50002525A-page 5
Preface
INTRODUCTION
This chapter contains general information that will be useful to know before using the
MCP37X1X-200 12-Bit Evaluation Kit. Items discussed in this chapter include:
• Document Layout
• Conventions Used in this Guide
• Recommended Reading
• The Microchip Website
• Customer Support
• Document Revision History
DOCUMENT LAYOUT
This document describes how to use the MCP37X1X-200 12-Bit Evaluation Kit to
demonstrate the performance of the MCP37X1X-200 device family. The manual layout
is as follows:
•
Chapter 1. “Product Overview” – Important information about the
MCP37X1X-200 12-Bit Evaluation Kit.
•
Chapter 2. “Installation and Operation” – Includes instructions on how to get
started with the MCP37X1X-200 12-Bit Evaluation Kit.
•
Appendix A. “Schematics and Layouts” – Refer to the board's web page for
the complete Schematics and Layouts.
•
Appendix B. “Bill of Materials (BOM)” – Refer to the board's web page for the
complete Bill of Materials.
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our website
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXXXXA”, where “XXXXXXXX” is the document number and “A” is the revision level
of the document.
For the most up-to-date information on development tools, see the MPLAB
®
IDE online help.
Select the Help menu, and then Topics to open a list of available online help files.
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.