Datasheet
2010 Microchip Technology Inc. DS22230A-page 11
MCP2003/4
2.0 ELECTRICAL CHARACTERISTICS
2.1 Absolute Maximum Ratings†
VIN DC Voltage on RXD, TXD, FAULT/TXE.....................................................................................................-0.3 to +30V
V
IN DC Voltage on CS, WAKE and VREN .......................................................................................................-0.3 to +30V
V
BB Battery Voltage, continuous....................................................................................................................-0.3 to +30V
V
BB Battery Voltage, non-operating (LIN bus recessive, t < 60s) ..................................................................-0.3 to +43V
V
BB Battery Voltage, transient ISO 7637 Test 1 ......................................................................................................-200V
V
BB Battery Voltage, transient ISO 7637 Test 2a ...................................................................................................+150V
V
BB Battery Voltage, transient ISO 7637 Test 3a ....................................................................................................-300V
V
BB Battery Voltage, transient ISO 7637 Test 3b ...................................................................................................+200V
V
LBUS Bus Voltage, continuous.......................................................................................................................-18 to +30V
V
LBUS Bus Voltage, transient (Note 1)............................................................................................................-27 to +43V
I
LBUS Bus Short Circuit Current Limit....................................................................................................................200 mA
ESD protection on LIN, V
BB (IEC 61000-4-2) (Note 2)........................................................................................... ±8 KV
ESD protection on LIN, V
BB (Human Body Model) (Note 3)................................................................................... ±8 KV
ESD protection on all other pins (Human Body Model) (Note 3) ............................................................................ ±4 KV
ESD protection on all pins (Charge Device Model) (Note 4) .................................................................................. ±2 KV
ESD protection on all pins (Machine Model) (Note 5).............................................................................................±200V
Maximum Junction Temperature............................................................................................................................. 150C
Storage Temperature ..................................................................................................................................-65 to +150C
Note 1: ISO 7637/1 load dump compliant (t < 500 ms).
2: According to IEC 61000-4-2, 330 ohm, 150 pF and Tranceiver EMC Test Specifications [2] to [4].
3: According to AEC-Q100-002/JESD22-A114.
4: According to AEC-Q100-011B.
5: According to AEC-Q100-003/JESD22-A115.
† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only and functional operation of the device at those or any other conditions above those
indicated in the operational listings of this specification is not implied. Exposure to maximum rating conditions for
extended periods may affect device reliability.