Datasheet

MCP1826/MCP1826S
DS22057B-page 36  2007-2013 Microchip Technology Inc.
PRODUCT IDENTIFICATION SYSTEM
To order or obtain information, e.g., on pricing or delivery, refer to the factory or the listed sales office.
Device: MCP1826: 1000 mA Low Dropout Regulator
MCP1826T: 1000 mA Low Dropout Regulator
Tape and Reel
MCP1826S: 1000 mA Low Dropout Regulator
MCP1826ST: 1000 mA Low Dropout Regulator
Tape and Reel
Output Voltage *: 08 = 0.8V “Standard”
12 = 1.2V “Standard”
18 = 1.8V “Standard”
25 = 2.5V “Standard”
30 = 3.0V “Standard”
33 = 3.3V “Standard”
50 = 5.0V “Standard”
ADJ = Adjustable Output Voltage ** (MCP1826 only)
*Contact factory for other output voltage options
** When ADJ is used, the “extra feature code” and
“tolerance” columns do not apply. Refer to examples.
Extra Feature Code: 0 = Fixed
Tolerance: 2 = 2.0% (Standard)
Temperature: E= -40C to +125C
Package Type: AB = Plastic Transistor Outline, TO-220, 3-lead
AT = Plastic Transistor Outline, TO-220, 5-lead
DB = Plastic Transistor Outline, SOT-223, 3-lead
DC = Plastic Transistor Outline, SOT-223, 5-lead
EB = Plastic, DDPAK, 3-lead
ET = Plastic, DDPAK, 5-lead
Note: ADJ (Adjustable) only available in 5-lead version.
PART NO. XXX
Output Feature
Code
Device
Voltage
X
Tolerance
X/
Temp.
XX
Package
Examples:
a) MCP1826-0802E/XX: 0.8V LDO Regulator
b) MCP1826-1002E/XX: 1.0V LDO Regulator
c) MCP1826-1202E/XX: 1.2V LDO Regulator
d) MCP1826-1802E/XX 1.8V LDO Regulator
e) MCP1826-2502EXX: 25V LDO Regulator
f) MCP1826-3002E/XX: 3.0V LDO Regulator
g) MCP1826-3302E/XX 3.3V LDO Regulator
h) MCP1826-5002E/XX: 5.0V LDO Regulator
i) MCP1826-ADJE/XX: ADJ LDO Regulator
a) MCP1826S-0802E/XX:0.8V LDO Regulator
b) MCP1826S-1002E/XX:1.0V LDO Regulator
c) MCP1826S-1202E/XX 1.2V LDO Regulator
d) MCP1826S-1802E/XX 1.8V LDO Regulator
e) MCP1826S-2502E/XX 2.5V LDO Regulator
f) MCP1826S-2502E/XX 3.0V LDO Regulator
g) MCP1826S-3302E/XX 3.3V LDO Regulator
h) MCP1826S-5002E/XX 5.0V LDO Regulator
XX = AB for 3LD TO-220 package
= AT for 5LD TO-220 package
= DB for 3LD SOT-223 package
= DC for 5LD SOT-223 package
= EB for 3LD DDPAK package
= ET for 5LD DDPAK package