Datasheet

USB 2.0 Hub and 10/100 Ethernet Controller
Datasheet
Revision 1.2 (02-29-12) 50 SMSC LAN9512/LAN9512i
DATASHEET
Notes:
1. All dimensions are in millimeters unless otherwise noted.
2. Dimension “b” applies to plated terminals and is measured between 0.15 and 0.30 mm from the terminal tip.
3. Details of terminal #1 identifier are optional, but must be located within the area indicated. The terminal #1
identifier may be either a mold or marked feature.
Figure 5.2 LAN9512/LAN9512i Recommended PCB Land Pattern