Datasheet

USB 2.0 Hub and 10/100 Ethernet Controller
Datasheet
Revision 1.2 (02-29-12) 24 SMSC LAN9512/LAN9512i
DATASHEET
3.1.1 Hub Configuration
EEPROM offsets 20h through 39h comprise the Hub Configuration parameters. Table 3.3 describes
these parameters and their default ROM values (Values assumed if no valid EEPROM present).
Table 3.3 Hub Configuration
EEPROM
OFFSET DESCRIPTION DEFAULT
20h Vendor ID LSB Register (VIDL)
Least Significant Byte of the Vendor ID. This is a 16-bit value that uniquely identifies
the Vendor of the user device (assigned by USB-Interface Forum).
24h
21h Vendor ID MSB (VIDM)
Most Significant Byte of the Vendor ID. This is a 16-bit value that uniquely identifies
the Vendor of the user device (assigned by USB-Interface Forum).
04h
22h Product ID LSB Register (PIDL)
Least Significant Byte of the Product ID. This is a 16-bit value that the Vendor can
assign that uniquely identifies this particular product (assigned by the OEM).
12h
23h Product ID MSB Register (PIDM)
Most Significant Byte of the Product ID. This is a 16-bit value that the Vendor can
assign that uniquely identifies this particular product (assigned by the OEM).
95h
24h Device ID LSB Register (DIDL)
Least Significant Byte of the Device ID. This is a 16-bit device release number in BCD
format (assigned by the OEM).
00h
25h Device ID MSB Register (DIDM)
Most Significant Byte of the Device ID. This is a 16-bit device release number in BCD
format (assigned by the OEM).
Note 3.1
26h Config Data Byte 1 Register (CFG1)
Refer to Table 3.4, “Config Data Byte 1 Register (CFG1) Format,” on page 30 for
details.
9Bh
27h Config Data Byte 2 Register (CFG2)
Refer to Table 3.5, “Config Data Byte 2 Register (CFG2) Format,” on page 31 for
details.
18h
28h Config Data Byte 3 Register (CFG3)
Refer to Table 3.6, “Config Data Byte 3 Register (CFG3) Format,” on page 32 for
details.
00h