Datasheet

 2016 Microchip Technology Inc. DS00002164B-page 15
LAN8710A/LAN8710AI
Note 2-5 The digital signals are not 5V tolerant. Refer to Section 5.1, "Absolute Maximum Ratings*," on
page 54 for additional buffer information.
Note 2-6 Sink and source capabilities are dependent on the VDDIO voltage. Refer to Section 5.1, "Absolute
Maximum Ratings*," on page 54 for additional information.
PD 50uA (typical) internal pull-down. Unless otherwise noted in the pin description, internal pull-
downs are always enabled.
Note: Internal pull-down resistors prevent unconnected inputs from floating. Do not rely
on internal resistors to drive signals external to the device. When connected to a
load that must be pulled low, an external resistor must be added.
AI Analog input
AIO Analog bi-directional
ICLK Crystal oscillator input pin
OCLK Crystal oscillator output pin
P Power pin
TABLE 2-9: BUFFER TYPES (CONTINUED)
BUFFER TYPE DESCRIPTION