Datasheet

TABLE 2-3: SERIAL MANAGEMENT INTERFACE (SMI) PINS
Num PINs NAME SYMBOL
BUFFER
TYPE
DESCRIPTION
1 SMI Data
Input/
Output
MDIO VIS/
VOD8
Serial Management Interface data input/output
1 SMI Clock MDC VIS Serial Management Interface clock
TABLE 2-4: ETHERNET PINS
Num PINs NAME SYMBOL
BUFFER
TYPE
DESCRIPTION
1 Ethernet TX/
RX Positive
Channel 1
TXP AIO Transmit/Receive Positive Channel 1
1 Ethernet TX/
RX Negative
Channel 1
TXN AIO Transmit/Receive Negative Channel 1
1 Ethernet TX/
RX Po
sitive
Channel 2
RXP AIO Transmit/Receive Positive Channel 2
1 Ethernet TX/
RX Neg
ative
Channel 2
RXN AIO Transmit/Receive Negative Channel 2
TABLE 2-5: MISCELLANEOUS PINS
Num PINs NAME SYMBOL
BUFFER
TYPE
DESCRIPTION
1 External
Cryst
al
Input
XTAL1 ICLK External crystal input
External
Clock Input
CLKIN ICLK Single-ended clock oscillator input.
Note: W
hen using a single ended clock
oscillator, XTAL2 should be left
unconnected.
1 External
Cryst
al Out-
put
XTAL2 OCLK External crystal output
1 External
Reset
nRST VIS
(PU)
System reset. This signal is active low.
LAN8710A/LAN8710AI
DS00002164B-page 12  2016 Microchip Technology Inc.