Datasheet

KSZ8895MQX/RQX/FQX/MLX
DS00002246A-page 86  2016 Microchip Technology Inc.
1
Remote
Loopback
1 = Perform Remote loopback, loopback path as
follows:
Port 1 (PHY ID address 0x1 reg. 1f, bit 1 = ‘1’)
Start: RXP1/RXM1 (port 1)
Loopback: PMD/PMA of port 1’s PHY
End: TXP1/TXM1 (port 1)
Setting PHY ID address 0x2, 3, 4, 5 reg. 1f, bit 1 =
‘1’ will perform remote loopback on port 2, 3, 4, 5.
0 = Normal Operation.
R/W 0
0 Reserved — RO 0
TABLE 4-12: MIIM REGISTERS (CONTINUED)
Address Name Description Mode Default