Datasheet
Information subject to change. The Microchip name and logo, the Microchip logo, dsPIC, MPLAB and PIC are registered trademarks and In-Circuit Serial Programming, ICSP and REAL ICE are trademarks
of Microchip Technology Incorporated in the U.S.A. and other countries. All other trademarks mentioned herein are property of their respective companies. © 2010 Microchip Technology Inc. All Rights
Reserved. Printed in the U.S.A. 8/10 DS51630B
*DS51630B*
Visit our web site for additional product information and to locate your local sales office.
www.microchip.com/tools
Microchip Technology Inc. • 2355 W. Chandler Blvd. • Chandler, AZ 85224-6199
Standard Probe Driver
The Standard Probe Driver uses a MPLAB
ICD 3 type connector (RJ-11) to connect
to the target application. Designs that are
compatible with MPLAB ICD3 debugging/
programming are quickly converted to use
MPLAB REAL ICE. This driver board is included in the MPLAB
REAL ICE In-Circuit Emulator Probe Kit (DV244005).
Performance Pak (AC244002)
The optional Performance Pak
consists of two circuit boards (driver
and receiver) that employ two CAT5
cables. Debug pins are driven
using LVDS communications, and
additional trace connections allow
high-speed serial trace uploads to
the PC.
Ordering Information – MPLAB® REAL ICE™ Products and Accessories
Part Number Description
DV244005 MPLAB REAL ICE In-Circuit Emulator Probe Kit, includes MPLAB REAL ICE In-Circuit Emulator and Standard Driver Board
(compatible with MPLAB® ICD 3 RJ-11). This kit contains: one MPLAB REAL ICE In-Circuit Emulator probe, one standard
probe driver, one 14-pin logic probe, one USB cable, one 6˝ RJ-11 modular cable and a CD containing MPLAB IDE
software and product documentation.
AC244002 MPLAB REAL ICE In-Circuit Emulator Performance Pak, includes a high-speed driver to replace the standard driver board
for high-speed LVDS communications, and a high-speed receiver board. The high-speed driver board uses a second
connector for high-speed trace upload. The Performance Pak contains: one high-speed driver board, one high-speed
receiver board, two 3 ft. CAT5 cables and one MPLAB ICD 3 RJ-11 to In-Circuit Serial Programming™ (ICSP™) adapter.
Various MPLAB REAL ICE In-Circuit Emulator Processor Extension Paks, available for select PIC microcontrollers, plug into the
processor socket on the target application and, in most cases, allow debug without reserving pins on the MCU.
Products Supported
The MPLAB REAL ICE In-Circuit Emulator supports most
Flash PIC MCUs and dsPIC DSCs. For the most current list
of supported parts, review the “README” fi le located in
MPLAB IDE. The fi rmware is continually being updated to add
support for new devices. As new device fi rmware is released,
it can be downloaded free of charge at: www.microchip.com.
Host System Requirements
■
PC-compatible system with an Intel Pentium® class or
higher processor, or equivalent
■
512 MB RAM recommended
■
150 MB hard drive space
■
CD-ROM drive
■
Available USB port
■
Microsoft® Windows® 2000 or Windows XP®