Datasheet

Table Of Contents

PICkit™ Serial Analyzer User’s Guide

TABLE 11-21:

Note 1: The upper nibble defines the Table-Tag, the lower nibble is reserved for

option flags

TABLE 11-22: TABLE-TAG: SLAVE ADDRESS (0X20)

The slave definition is 4 bytes long (including the tag). Two bytes are reserved for

firmware operation.

TABLE 11-23: TABLE-TAG: REGISTER DEFINITION

The length of a register definition is flexible.

Lower nibble of Table-Tag is defined as option bits (refer to table below):

TABLE 11-24:

A ‘memory block’ is a set of N contiguous addresses beginning with ‘Register ID’. An

C transaction is permitted to access one or more bytes anywhere within the block.

TABLE 11-25: TABLE-TAG: END

Table-Tag

(1)

DESCRIPTION

0x10 Slave Address

0x2X Register Definition

0x40 End of Slave Profile

Table-Tag: SLAVE ADDR: 0x20

Data: Slave Address

Data: (Reserved)

Table-Tag: REG DEF: 0x4X

Data: Register ID / # / Address

Data: Byte Count = N

Data: Data[0]

...

Data: Data[N-3]

Table-Tag[3] ‘memory block’ of sequential locations beginning with register #

Table-Tag[2]

Table-Tag[1] disable Read

Table-Tag[0] disable Write

Table-Tag: END: 0x80