Datasheet

 2013-2014 Microchip Technology Inc. DS70000689D-page 455
dsPIC33EPXXXGM3XX/6XX/7XX
FIGURE 33-10: HIGH-SPEED PWMx MODULE FAULT TIMING CHARACTERISTICS
FIGURE 33-11: HIGH-SPEED PWMx MODULE TIMING CHARACTERISTICS
Fault Input
PWMx
MP30
MP20
(active-low)
PWMx
MP11
MP10
Note: Refer to Figure 33-1 for load conditions.
TABLE 33-28: HIGH-SPEED PWMx MODULE TIMING REQUIREMENTS
AC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Param
No.
Symbol Characteristic
(1)
Min. Typ. Max. Units Conditions
MP10 T
FPWM PWMx Output Fall Time — — — ns See Parameter DO32
MP11 TRPWM PWMx Output Rise Time — — — ns See Parameter DO31
MP20 T
FD Fault Input  to PWMx
I/O Change
——15ns
MP30 T
FH Fault Input Pulse Width 15 — — ns
Note 1: These parameters are characterized but not tested in manufacturing.