Datasheet
2013-2014 Microchip Technology Inc. DS70000689D-page 443
dsPIC33EPXXXGM3XX/6XX/7XX
TABLE 33-11: DC CHARACTERISTICS: I/O PIN OUTPUT SPECIFICATIONS
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C TA +85°C for Industrial
-40°C T
A +125°C for Extended
Param. Symbol Characteristic Min. Typ. Max. Units Conditions
DO10 V
OL Output Low Voltage
4x Sink Driver Pins
(1)
——0.4VVDD = 3.3V,
I
OL
6 mA, -40°C
T
A
+85°C,
I
OL
5 mA, +85°C
T
A
+125°C
Output Low Voltage
8x Sink Driver Pins
(2)
——0.4VVDD = 3.3V,
I
OL
12 mA, -40°C
T
A
+85°C,
I
OL
8 mA, +85°C
T
A
+125°C
DO20 VOH Output High Voltage
4x Source Driver Pins
(1)
2.4 — — V IOH -10 mA, VDD = 3.3V
Output High Voltage
8x Source Driver Pins
(2)
2.4 — — V IOH -15 mA, VDD = 3.3V
DO20A V
OH1 Output High Voltage
4x Source Driver Pins
(1)
1.5 — — V IOH -14 mA, VDD = 3.3V
2.0 — — IOH -12 mA, VDD = 3.3V
3.0 — — IOH -7 mA, VDD = 3.3V
Output High Voltage
8x Source Driver Pins
(2)
1.5 — — V IOH -22 mA, VDD = 3.3V
2.0 — — IOH -18 mA, VDD = 3.3V
3.0 — — IOH -10 mA, VDD = 3.3V
Note 1: Includes all I/O pins that are not 8x Sink Driver pins (see below).
2: Includes the following pins:
For 44-pin devices: RA3, RA4, RA7, RA9, RA10, RB7, RB<15:9>, RC1 and RC<9:3>
For 64-pin devices: RA4, RA7, RA<10:9>, RB7, RB<15:9>, RC1, RC<9:3>, RC15 and RG<8:7>
For 100-pin devices: RA4, RA7, RA9, RA10, RB7, RB<15:9>, RC1, RC<9:3>, RC15, RD<3:1> and RG<8:6>
TABLE 33-12: ELECTRICAL CHARACTERISTICS: BOR
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C TA +85°C for Industrial
-40°C T
A +125°C for Extended
Param
No.
Symbol Characteristic Min.
(1)
Typ. Max. Units Conditions
BO10 V
BOR BOR Event on VDD Transition
High-to-Low
2.7 — 2.95 V VDD
(Note 2, Note 3)
PO10 V
POR POR Event on VDD Transition
High-to-Low
1.75 — 1.95 V (Note 2)
Note 1: Parameters are for design guidance only and are not tested in manufacturing.
2: The V
BOR specification is relative to VDD.
3: The device is functional at V
BORMIN < VDD < VDDMIN. Analog modules: ADC, op amp/comparator and
comparator voltage reference will have degraded performance. Device functionality is tested but not
characterized.