Datasheet

 2013-2014 Microchip Technology Inc. DS70000689D-page 439
dsPIC33EPXXXGM3XX/6XX/7XX
TABLE 33-9: DC CHARACTERISTICS: DOZE CURRENT (IDOZE)
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Parameter No. Typ.
(2)
Max.
Doze
Ratio
Units Conditions
Doze Current (I
DOZE)
(1)
DC73a 20 53 1:2 mA
-40°C 3.3V 70 MIPS
DC73g 8 30 1:128 mA
DC70a 19 53 1:2 mA
+25°C 3.3V 60 MIPS
DC70g 8 30 1:128 mA
DC71a 20 53 1:2 mA
+85°C 3.3V 60 MIPS
DC71g 10 30 1:128 mA
DC72a 25 42 1:2 mA
+125°C 3.3V 50 MIPS
DC72g 12 30 1:128 mA
Note 1: I
DOZE is primarily a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact
on the current consumption. The test conditions for all IDOZE measurements are as follows:
• Oscillator is configured in EC mode and external clock is active, OSC1 is driven with external square
wave from rail-to-rail (EC clock overshoot/undershoot < 250 mV required)
• CLKO is configured as an I/O input pin in the Configuration Word
• All I/O pins are configured as outputs and driving low
•MCLR = VDD, WDT and FSCM are disabled
• CPU, SRAM, program memory and data memory are operational
• No peripheral modules are operating or being clocked (defined PMDx bits are all ones)
• CPU executing
while(1)
{
NOP();
}
• JTAG is disabled
2: Data in the “Typical” column is at 3.3V, +25°C unless otherwise specified.