Datasheet

dsPIC33EPXXXGM3XX/6XX/7XX
DS70000689D-page 436  2013-2014 Microchip Technology Inc.
TABLE 33-6: DC CHARACTERISTICS: OPERATING CURRENT (IDD)
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Param. Typ.
(2)
Max. Units Conditions
Operating Current (I
DD)
(1)
DC20d 6.0 18.0 mA -40°C
3.3V 10 MIPS
DC20a 6.0 18.0 mA +25°C
DC20b 6.0 18.0 mA +85°C
DC20c 6.0 18.0 mA +125°C
DC21d 11.0 20.0 mA -40°C
3.3V 20 MIPS
DC21a 11.0 20.0 mA +25°C
DC21b 11.0 20.0 mA +85°C
DC21c 11.0 20.0 mA +125°C
DC22d 17.0 30.0 mA -40°C
3.3V 40 MIPS
DC22a 17.0 30.0 mA +25°C
DC22b 17.0 30.0 mA +85°C
DC22c 17.0 30.0 mA +125°C
DC23d 25.0 50.0 mA -40°C
3.3V 60 MIPS
DC23a 25.0 50.0 mA +25°C
DC23b 25.0 50.0 mA +85°C
DC23c 25.0 50.0 mA +125°C
DC24d 30.0 60.0 mA -40°C
3.3V 70 MIPSDC24a 30.0 60.0 mA +25°C
DC24b 30.0 60.0 mA +85°C
Note 1: I
DD is primarily a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact
on the current consumption. The test conditions for all IDD measurements are as follows:
• Oscillator is configured in EC mode and external clock is active, OSC1 is driven with external square
wave from rail-to-rail (EC clock overshoot/undershoot < 250 mV required)
• CLKO is configured as an I/O input pin in the Configuration Word
• All I/O pins are configured as outputs and driving low
•MCLR
= VDD, WDT and FSCM are disabled
• CPU, SRAM, program memory and data memory are operational
• No peripheral modules are operating or being clocked (defined PMDx bits are all ones)
• CPU executing
while(1)
{
NOP();
}
• JTAG is disabled
2: Data in “Typ” column is at 3.3V, +25°C unless otherwise stated.