Datasheet

 2013-2014 Microchip Technology Inc. DS70000689D-page 433
dsPIC33EPXXXGM3XX/6XX/7XX
33.0 ELECTRICAL CHARACTERISTICS
This section provides an overview of dsPIC33EPXXXGM3XX/6XX/7XX electrical characteristics. Additional information
will be provided in future revisions of this document as it becomes available.
Absolute maximum ratings for the dsPIC33EPXXXGM3XX/6XX/7XX family are listed below. Exposure to these
maximum rating conditions for extended periods may affect device reliability. Functional operation of the device at these
or any other conditions above the parameters indicated in the operation listings of this specification is not implied.
Absolute Maximum Ratings
(See Note 1)
Ambient temperature under bias.............................................................................................................-40°C to +125°C
Storage temperature .............................................................................................................................. -65°C to +160°C
Voltage on V
DD with respect to VSS .......................................................................................................... -0.3V to +4.0V
Voltage on any pin that is not 5V tolerant with respect to V
SS
(3)
..................................................... -0.3V to (VDD + 0.3V)
Voltage on any 5V tolerant pin with respect to VSS when VDD  3.0V
(3)
................................................... -0.3V to +5.5V
Voltage on any 5V tolerant pin with respect to Vss when V
DD < 3.0V
(3)
................................................... -0.3V to +3.6V
Voltage on V
CAP with respect to VSS ........................................................................................................ 1.62V to 1.98V
Maximum current out of VSS pin ...........................................................................................................................350 mA
Maximum current into VDD pin
(2)
...........................................................................................................................350 mA
Maximum current sunk by any I/O pin.....................................................................................................................20 mA
Maximum current sourced by I/O pin ......................................................................................................................18 mA
Maximum current sourced/sunk by all ports
(2,4)
....................................................................................................200 mA
Note 1: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only and functional operation of the device at those or any other conditions
above those indicated in the operational listings of this specification is not implied. Exposure to maximum
rating conditions for extended periods may affect device reliability.
2: Maximum allowable current is a function of device maximum power dissipation (see Table 33- 2 ).
3: See the “Pin Diagrams” section for the 5V tolerant pins.
4: Exceptions are: RA3, RA4, RA7, RA9, RA10, RB7-RB15, RC3, RC15, RD1-RD4, which are able to sink
30 mA and source 20 mA.