Datasheet

dsPIC33EPXXXGM3XX/6XX/7XX
DS70000689D-page 352  2013-2014 Microchip Technology Inc.
bit 1-0 PTGITM<1:0>: PTG Input Trigger Command Operating Mode bits
(1)
11 = Single level detect with step delay is not executed on exit of command (regardless of PTGCTRL
command)
10 = Single level detect with step delay is executed on exit of command
01 = Continuous edge detect with step delay is not executed on exit of command (regardless of
PTGCTRL command)
00 = Continuous edge detect with step delay is executed on exit of command
REGISTER 25-1: PTGCST: PTG CONTROL/STATUS REGISTER (CONTINUED)
Note 1: These bits apply to the PTGWHI and PTGWLO commands only.
2: This bit is only used with the PTGCTRL Step command software trigger option.