User Manual

PIC32 Starter Kit User’s Guide
DS61159B-page 14 © 2010 Microchip Technology Inc.
2.1.5 LEDs
The LEDs, RD0 through RD2, are connected to PORTD of the processor. The PORTD
pins are set high to light the LEDs.
2.1.6 Oscillator Options
The installed microcontroller has an oscillator circuit connected to it. The main oscillator
uses an 8 MHz crystal (Y2) and functions as the controller’s primary oscillator. Use of
an external crystal is not required for PIC32 designs. Your design may use the internal
oscillator, if desired.
The PIC18LF4550, at the heart of the USB subsystem, is independently clocked and
has its own 8 MHz crystal (Y1).
2.1.7 120-Pin Modular Expansion Connector
The PIC32 Starter Kit demo board has been designed with a 120-pin modular expan-
sion interface, which allows the board to provide basic generic functionality now, as well
as easy extendability to new technologies as they become available.
TABLE 2-1: STARTER BOARD CONNECTOR PART NUMBERS
Connector HIROSE Electric PN
Starter Board Connector FX10A-120P/12-SV1(71)
Application Board Connector FX10A-120S/12-SV(71)