Datasheet

 2018 Microchip Technology Inc. Data Sheet Complete DS40002058A-page 218
ATxmega128A1U/ATxmega64A1U
40.6 8385E – 11/2012
40.7 8385D – 07/2012
40.8 8385C – 07/2012
40.9 8385B – 03/2012
40.10 8385A – 11/2011
1. Updated the whole contents with an updated template (table tags and paragraph tags).
2. Updated the 100C1 package type on page 8. Ball pitch is 0.80mm instead of 0.88mm.
3. Updated Figure 2-1 on page 9. Pin 14 is VCC and not VDD.
4. Updated Table 7-2 on page 20. ATxmega64A1U has internal SRAM (4K). ATxmega128A1U has internal SRAM (8K).
5. Updated Figure 15-7 on page 39, “Input sensing system overview” .
6. Updated Figure 31-1 on page 61, “Analog comparator overview.”
7. Added electrical characteristics for “ATxmega64A1U” on page 80.
8. Updated Table 37-29 on page 95 and Table 37-63 on page 118. Added ESR and start-up time parameters.
9. Added typical characteristics for “ATxmega64A1U” on page 126.
1. Updated Table 7-2 on page 21. Devices are respectively ATxmega64A1U and ATxmega128A1U.
1. Updated Table 7-1 on page 19. Device ID for ATxmega128A1U is 4C97. Device ID for ATxmega64A1U is 4E96.
2. Updated the package “100C2” on page 79. The ball rows are A-K (without I).
3.
Updated the whole datasheet using the Atmel new updated datasheet template that includes Atmel new logo and
new registered TM.
1. Added “Electrical Characteristics” on page 80.
2. Added “Typical Characteristics” on page 126.
3. Updated “Errata” on page 209.
4. Used Atmel new datasheet template that includes Atmel new addresses on the last page.
1. Initial revision.