Datasheet

16.6 Application Examples
16.6.1 Debug Environment
The figure below shows a complete debug environment example. The SW-DP interface is used for standard
debugging functions, such as downloading code and single-stepping through the program and viewing core and
peripheral registers.
Figure 16-2. Application Debug Environment Example
Microchip MCU
Host Debugger
PC
Cortex
-M7-based Application Board
Serial Wire
Debug Port
Connector
Serial Wire
Debug Port
Emulator/Probe
16.6.2 Test Environment
The figure below shows a test environment example (JTAG Boundary scan). Test vectors are sent and interpreted by
the tester
. In this example, the “board in test” is designed using a number of JTAG-compliant devices. These devices
can be connected to form a single scan chain.
Figure 16-3. Application Test Environment Example
Chip 2
Chip n
Chip 1
Microchip MCU
Cortex-M7-based Application Board In Test
JTAG
Connector
Tester
Test Adaptor
JT
AG
Probe
SAM E70/S70/V70/V71 Family
Debug and T
est Features
© 2019 Microchip T
echnology Inc.
Datasheet
DS60001527D-page 73