Datasheet

31.20.32 PMC SleepWalking Status Register 0
Name: PMC_SLPWK_SR0
Offset: 0x011C
Reset: 0x00000000
Property: Read-only
Bit 31 30 29 28 27 26 25 24
PID31 PID30 PID29 PID28 PID27 PID26 PID25 PID24
Access
Reset 0 0 0 0 0 0 0 0
Bit 23 22 21 20 19 18 17 16
PID23 PID22 PID21 PID20 PID19 PID18 PID17 PID16
Access
Reset 0 0 0 0 0 0 0 0
Bit 15 14 13 12 11 10 9 8
PID15 PID14 PID13 PID12 PID11 PID10 PID9 PID8
Access
Reset 0 0 0 0 0 0 0 0
Bit 7 6 5 4 3 2 1 0
PID7
Access
Reset 0
Bits 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31 – PIDx Peripheral x
SleepW
alking Status
Not all PIDs can be configured with asynchronous partial wake-up.
Only the following PIDs can be configured with asynchronous partial wake-up: UARTx and TWIHSx.
Value Description
0
The asynchronous partial wake-up (SleepWalking) function of the peripheral is currently disabled or the
peripheral enabled for asynchronous partial wake-up (SleepW
alking) cleared the PIDn bit upon
detection of a wake-up condition.
1
The asynchronous partial wake-up (SleepWalking) function of the peripheral is currently enabled.
Note: “PIDx” refers to identifiers as defined in the section “Peripheral Identifiers”.
SAM E70/S70/V70/V71 Family
Power Management Controller (PMC)
© 2019 Microchip T
echnology Inc.
Datasheet
DS60001527D-page 301