Datasheet

...........continued
Date Changes
Table 56-4 “Core Power Supply Brownout Detector Characteristics”: updated all values. Changed Note
1.
T
able 56-6 “VDDIO Supply Monitor”: updated values for T
ACCURACY
Table 56-9. “DC Flash Characteristics” moved to Table 56-2 “DC Characteristics”.
Section 56.3.2.1 “Sleep Mode Conditions”: corrected number of WKUP pins.
Added Section 56.3.6 “I/O Switching Power Consumption”.
Table 56-21 “32 kHz RC Oscillator Characteristics”: changed max values to TBD for t
START
, I
DDON
and
I
DDON_STANDBY
.
Table 56-25 “3 to 20 MHz Crystal Oscillator Characteristics”: for t
START
and I
DD_ON,
changed max values
to TBD. Added parameter I
DD._STANDBY.
Table 56-26 “Crystal Characteristics”: ESR: added new row with condition Fundamental at 3 MHz.
Changed max values for 8 and 12 MHz.
Table 56-29 “PLLA Characteristics”: changed max value of f
IN
. Added parameter I
DD_STDBY
Added Section 56.6 “PLLUSB Characteristics”>
Updated section Section 56.7 “USB Transceiver Characteristics”.
Moved Section 56.8 MediaLB to Section 56.8.
Section 56.9 “AFE Characteristics”: changed numbering of sub-sections throughout.
- Removed bullet on min and max data.
- Changed all occurrences of ADVREFP to VREP, and of ADVREFN to VREFN throughout section.
- Changed all occurrences of ADC to AFE, where relevant.
- Modified Figure 56-11 “Single-ended Mode AFE” and Figure 56-12 “Differential Mode AFE”.
- Table 56-36 “Power Supply Characteristics”: updated I
VDDIN
conditions in and changed max values.
Changed max values for I
VDDCORE.
Removed Note 1 due to incorrect cross-reference. Added Note 3 on
current consumption.
- Table 56-38 “VREFP Electrical Characteristics”: changed min and max values for I
VREFP
.
- Table 56-46 “Single-ended Output Offset Error”: added note on voltage application.
- Table 56-47 “Single-ended Static Electrical Characteristics”: added conditions and values.
- Table 56-49 “Differential Static Electrical Characteristics”: changed min and max values.
Added Section 56.10 “Analog Comparator Characteristics”.
Section 56.12 “12-bit DAC Characteristics”
- Added note to Table 56-59 “Analog Power Supply Characteristics”. Added new conditions to Table
56-62 “Static Performance Characteristics”. and updated min and max values for INL, DNL and Gain
Error.
Section 56.13 “Timings for Worst-Case Conditions”
- Table 56-68 “I/O Characteristics”: new conditions and the corresponding max values added.
- Section 56.13.2 “Embedded Flash Characteristics”: in Table 56-87 “AC Flash Characteristics” changed
Full Chip Erase values. Replaced two “Embedded Flash Wait State” tables with single Table 56-88
“Embedded Flash Wait State at 105°C“
SAM E70/S70/V70/V71 Family
Revision History
© 2019 Microchip T
echnology Inc.
Datasheet
DS60001527D-page 1972