Datasheet

...........continued
Date Changes
Section 51.1 “Description”: removed information on refresh feature.
Figure 51-1 “Block Diagram”: added VDDANA, VREFP and VREFN.
T
able 51-1 “DACC Signal Description”: added VREFP and VREFN to table.
Section 51.2 “Embedded Characteristics”: removed bullet on refresh period.
Added Section 51.5.1 “I/O Lines”.
Section 51.6.3 “Analog Output Mode Selection”: corrected bit name for output modeselection to ‘DIFF’
from ‘ANA_MODE_SEL’ .
Section 51.6.4 “Conversion Modes”: added details on enabling conversion modes. Removed bullet
“Interpolated Mode”.
Removed section 51.6.5 “Refresh Mode”.
Updated Section 51.6.4.4 “Interpolation Mode”.
Section 51.7.2 “DACC Mode Register”: removed field REFRESH and description. Bits 15:8 now
reserved.
Section 51.7.6 “DACC Channel Status Register”: modified DACRDYx bit descriptions.
Section 51.7.11 “DACC Interrupt Status Register”: ENDTXx, TXBUFEx descriptions: corrected register
name to ‘DACC_CDRx’ from ‘DACC _TCR or DACC_TNCR’.
Section 52. “Analog Comparator Controller (ACC)”
In text and in tables throughout this section, changed all occurrences of ADVREF to VREFP.
Section 52.2 “Embedded Characteristics”: In bullet: “Four Voltage References...”, changed ADVREF to
‘External Voltage Reference’
Renamed Section 5. to “Signal Description”
Removed Table 52-1 “List of External Analog Data Inputs” and note referring to this table.
Section 53. “Integrity Check Monitor (ICM)”
Section 53.1 “Description”: updated content.
Renamed section “ICM SHA Engine” to “Using ICM as SHA Engine” and updated content.
Added Section 53.5.4.1 “Settings for Simple SHA Calculation”.
Section 53.5.2.2 “ICM Region Configuration Structure Member”: updated descriptions for RHIEN,
DMIEN, BEIEN, WCIEN, ECIEN, SUIEN and MPROT.
Section 53.6.1 “ICM Configuration Register”: updated descriptions for DAPROT and HAPROT.
Section 53.6.3 “ICM Status Register”: updated descriptions for RAWRMDIS and RMDIS.
24-Feb-15 Section 55. “Advanced Encryption Standard (AES)”
Section 55.4.5.2 “DMA Mode”: removed references to ‘BTC’ throughout.
Section 56. “Electrical Characteristics”
T
able 56-1 “Absolute Maximum Ratings*“: added reference to Note 1 for 64-pin QFN package.
Table 56-2 “DC Characteristics”: updated conditions for V
IL
, V
IH
, V
OH
, V
OL
, I
O
, R
PULLUP
, R
PULLDOWN
,
R
SERIAL.
Added parameter Flash Active Current characteristics. Added parameter Static Current.
Modified Note (1) below table.
Table 56-3 “1.2V Voltage Regulator Characteristics”: removed note on VDDIO voltage at power-up (was
Note 3). Updated note on VDDIO voltage value. Changed values of CD
OUT
. Changed conditions for
parameter t
START
and CD
OUT
value in Note 2.
SAM E70/S70/V70/V71 Family
Revision History
© 2019 Microchip T
echnology Inc.
Datasheet
DS60001527D-page 1971