Datasheet

Figure 58-7. Measurement Setup for Wait Mode
VDDIO
VDDOUT
VDDCORE
VDDIN
Voltage
Regulator
VDDPLL
3.3V
AMP1
AMP2
The following tables give current consumption and wakeup time
(1)
in W
ait mode.
Table 58-15. Typical Current Consumption in Wait Mode
Wait Mode
Consumption
Typical Value
Unit
at 25°C at 85°C at 105°C
VDDIO = 3.3V VDDIO = 3.3V VDDIO = 3.3V
Conditions
VDDOUT
Consumption
AMP1
Total
Consumption
AMP2
Total
Consumption
AMP2
Total
Consumption
AMP2
No activity on the I/Os
of the device
– 0.3 3.8 7.5 mA
Table 58-16. Typical Wakeup Time to Resume from Wait Mode
Conditions Wake-up Time from Wait Mode Unit
Resume from internal Flash with Cache enabled 8.1 µs
Resume from internal Flash with Cache disabled 8.5 µs
Resume from internal SRAM with Cache disabled 8 µs
58.3.4 Active Mode Power Consumption
The conditions for measurement are defined as follows:
•
V
DDIO
= V
DDIN
= 3.3V
• V
DDCORE
is provided by the Internal Voltage Regulator
• T
A
= 25°C
• Application running from Flash memory with 128-bit access mode
• All peripheral clocks are deactivated.
• Master Clock (MCK) running at various frequencies with PLLA or the fast RC oscillator.
• Current measurement on AMP1 (VDDCORE) and total current on AMP2
SAM E70/S70/V70/V71 Family
Electrical Characteristics for SAM ...
©
2019 Microchip Technology Inc.
Datasheet
DS60001527D-page 1827