Datasheet

Value Description
1
A Flash memory error occurred at the end of programming (EraseVerify or WriteVerify test has failed).
Bit 2 – FLOCKE Flash Lock Error Status (cleared on read)
This flag is automatically cleared when EEFC_FSR is read or EEFC_FCR is written.
Value Description
0
No programming/erase of at least one locked region has happened since the last read of EEFC_FSR.
1
Programming/erase of at least one locked region has happened since the last read of EEFC_FSR.
Bit 1 – FCMDE Flash Command Error Status (cleared on read or by writing EEFC_FCR)
Value Description
0
No invalid commands and no bad keywords were written in EEFC_FMR.
1
An invalid command and/or a bad keyword was/were written in EEFC_FMR.
Bit 0 – FRDY Flash Ready Status (cleared when Flash is busy)
When set, this flag triggers an interrupt if the FRDY flag is set in EEFC_FMR.
This flag is automatically cleared when the EEFC is busy
.
Value Description
0
The EEFC is busy.
1
The EEFC is ready to start a new command.
SAM E70/S70/V70/V71 Family
Enhanced Embedded Flash Controller (EEFC)
© 2019 Microchip T
echnology Inc.
Datasheet
DS60001527D-page 149