Datasheet

33.8.20 Debug Control
Name: DBGCTRL
Offset: 0x2A
Reset: 0x00
Property: Write-Protected
Bit 7 6 5 4 3 2 1 0
DBGRUN
Access
R/W
Reset 0
Bit 0 – DBGRUN Debug Run
This bit can be changed only while the ADC is disabled.
This bit should be written only while a conversion is not ongoing.
Value Description
0
The ADC is halted during debug mode.
1
The ADC continues normal operation during debug mode.
SAM D21 Family
ADC – Analog-to-Digital Converter
© 2018 Microchip Technology Inc.
Datasheet Complete
DS40001882D-page 929