Datasheet

33.8.9 Event Control
Name: EVCTRL
Offset: 0x14
Reset: 0x00
Property: Write-Protected
Bit 7 6 5 4 3 2 1 0
WINMONEO RESRDYEO SYNCEI STARTEI
Access
R/W R/W R/W R/W
Reset 0 0 0 0
Bit 5 – WINMONEO Window Monitor Event Out
This bit indicates whether the Window Monitor event output is enabled or not and an output event will be
generated when the window monitor detects something.
Value Description
0
Window Monitor event output is disabled and an event will not be generated.
1
Window Monitor event output is enabled and an event will be generated.
Bit 4 – RESRDYEO Result Ready Event Out
This bit indicates whether the Result Ready event output is enabled or not and an output event will be
generated when the conversion result is available.
Value Description
0
Result Ready event output is disabled and an event will not be generated.
1
Result Ready event output is enabled and an event will be generated.
Bit 1 – SYNCEI Synchronization Event In
Value Description
0
A flush and new conversion will not be triggered on any incoming event.
1
A flush and new conversion will be triggered on any incoming event.
Bit 0 – STARTEI Start Conversion Event In
Value Description
0
A new conversion will not be triggered on any incoming event.
1
A new conversion will be triggered on any incoming event.
SAM D21 Family
ADC – Analog-to-Digital Converter
© 2018 Microchip Technology Inc.
Datasheet Complete
DS40001882D-page 917