Datasheet

32.8.5.9 Pipe Interrupt Summary
Name: PINTSMRY
Offset: 0x20
Reset: 0x0000
Property: Read-only
Bit 15 14 13 12 11 10 9 8
PINT[15:8]
Access
R R R R R R R R
Reset 0 0 0 0 0 0 0 0
Bit 7 6 5 4 3 2 1 0
PINT[7:0]
Access
R R R R R R R R
Reset 0 0 0 0 0 0 0 0
Bits 15:0 – PINT[15:0]
The flag PINT[n] is set when an interrupt is triggered by the pipe n. See 32.8.6.6 PINTFLAG register in
the Host Pipe Register section.
This bit will be cleared when there are no interrupts pending for Pipe n.
Writing to this bit has no effect.
32.8.6 Host Registers - Pipe
SAM D21 Family
USB – Universal Serial Bus
© 2018 Microchip Technology Inc.
Datasheet Complete
DS40001882D-page 868