Datasheet

31.8.10 Interrupt Enable Clear
Name: INTENCLR
Offset: 0x24
Reset: 0x00000000
Property: PAC Write-Protection
This register allows the user to enable an interrupt without doing a read-modify-write operation. Changes
in this register will also be reflected in the Interrupt Enable Set (INTENSET) register.
Bit 31 30 29 28 27 26 25 24
Access
Reset
Bit 23 22 21 20 19 18 17 16
MCx MCx MCx MCx
Access
R/W R/W R/W R/W
Reset 0 0 0 0
Bit 15 14 13 12 11 10 9 8
FAULT1 FAULT0 FAULTB FAULTA DFS UFS
Access
R/W R/W R/W R/W R/W R/W
Reset 0 0 0 0 0 0
Bit 7 6 5 4 3 2 1 0
ERR CNT TRG OVF
Access
R/W R/W R/W R/W
Reset 0 0 0 0
Bits 19,18,17,16 – MCx Match or Capture Channel x Interrupt Enable
Writing a '0' to this bit has no effect.
Writing a '1' to this bit will clear the corresponding Match or Capture Channel x Interrupt Disable/Enable
bit, which disables the Match or Capture Channel x interrupt.
Value Description
0
The Match or Capture Channel x interrupt is disabled.
1
The Match or Capture Channel x interrupt is enabled.
Bit 15 – FAULT1 Non-Recoverable Fault x Interrupt Enable
Writing a '0' to this bit has no effect.
Writing a '1' to this bit will clear the Non-Recoverable Fault x Interrupt Disable/Enable bit, which disables
the Non-Recoverable Fault x interrupt.
Value Description
0
The Non-Recoverable Fault x interrupt is disabled.
1
The Non-Recoverable Fault x interrupt is enabled.
SAM D21 Family
TCC – Timer/Counter for Control Applications
© 2018 Microchip Technology Inc.
Datasheet Complete
DS40001882D-page 764