Datasheet

30.8.6 Debug Control
Name:  DBGCTRL
Offset:  0x08
Reset:  0x00
Property:  PAC Write-Protection
Bit 7 6 5 4 3 2 1 0
DBGRUN
Access
R/W
Reset 0
Bit 0 – DBGRUN Debug Run Mode
This bit is not affected by a software reset, and should not be changed by software while the TC is
enabled.
Value Description
0
The TC is halted when the device is halted in debug mode.
1
The TC continues normal operation when the device is halted in debug mode.
SAM D21 Family
TC – Timer/Counter
© 2018 Microchip Technology Inc.
Datasheet Complete
DS40001882D-page 690