Datasheet

Value Description
0
The peripheral is disabled.
1
The peripheral is enabled.
Bit 0 – SWRST Software Reset
Writing a '0' to this bit has no effect.
Writing a '1' to this bit resets all registers in the TC, except DBGCTRL, to their initial state, and the TC will
be disabled.
Writing a '1' to CTRLA.SWRST will always take precedence; all other writes in the same write-operation
will be discarded.
Due to synchronization there is a delay from writing CTRLA.SWRST until the reset is complete.
CTRLA.SWRST and SYNCBUSY.SWRST will both be cleared when the reset is complete.
This bit is not enable protected.
Value Description
0
There is no reset operation ongoing.
1
The reset operation is ongoing.
SAM D21 Family
TC – Timer/Counter
© 2018 Microchip Technology Inc.
Datasheet Complete
DS40001882D-page 683